ProECU has arrived at Litchfield Development, litchfield, Newsletter, Nissan GTR, Nissan Juke, Subaru Impreza, Upgrades
June 18, 2012 by litchfield

They say the best things come to those who wait, well it has been a very long wait but fortunately it has definitely been worth it!

As many of your know we have been working hard with EcuTek to develop their Nissan GTR ECU software since we imported the first car into Europe and it is now reaching full maturity. Their new ProECU cable and software is the final part of their package and a massive step forward for EcuTek and us as their main dealers.

Litchfield are EcuTeks’ largest independent dealer after OEs like Subaru and Mitsubishi having even over taken Prodrive in 2011. We have been right at the forefront of many of EcuTek’s products including the GTR development program with our team regularly requesting and proving new features on our own car or lending vehicles to EcuTek for additional work.


ProECU is the same powerful tool set we use daily and is set to revolutionise how we are able to work with our customers around the world and will allow us to further improve the individual support we are able to offer. ProECU allows the end user to take control of their car with a host of incredible features:
- Custom Remote Tuning / E –Tuning with programmable engine and gearbox ECU option
- Detailed Data Logging of standard and custom parameters from both the Engine and Gearbox ECUs
- Instant Data log analysis built into the software for viewing in graph format, 2D or 3D.
- External sensor logging such as Wide Band Lambda sensors
- Read and clear Diagnostic Trouble Codes for all key modules
- Service tools for simple vehicle maintenance; clutch learning, Touch points, gearbox temperature history, engine balancing, fuel trim reset, misfire detection, steering position sensor and much, much more.
- Easy to use software with automatic updates available online
- Litchfield software updates available to download or by email so you always have the latest revision
- Litchfield License promise to insure future proofing of the cable.
- Compatibility with all EcuTek supported ECUs so you can read DTCs or tune additional vehicles from other makes

E – Tuning
This will completely change the way we tune many of our customers cars. It will allow us to provide our tuning solutions for customers that live to far away from us or have time constraints stopping them from visiting. It will also allow all our previous customers to be kept up to date with the latest software revisions and features from the comfort of their home. ProECU is able to receive revised ECU files for both the engine and gearbox of the GTR and allows our customers to simply and safely update their car.

Data Logging
One of ECUTEK’s biggest strengths is its powerful data logging and analysis software which lets you choose any of the standard or custom parameters to be watched live, recorded and then instantly viewed in a variety of formats. The recorded data can be email to us for further analysis and returned with any map amendments.
This feature allows you to monitor in great detail how your car is performing at any given time.
Fault Code Reading
Despite its performance the GTR is one of the most reliable cars we have worked with however problems can occur and enables internally logged fault codes to be read and cleared.
ProECU is able to communicate with all the major control modules on the car to give increased reassurance. The team at Litchfield is on hand to help with any concerns that may arise and will help us make quick assessments of the problem and what is required to fix it.

Servicing Tools
ProECU allows the servicing tools to be instantly available. Owners can perform these key features which are usually only found in the main dealer diagnostic systems. This includes:
- Clutch learning
- Clutch Touch Point Adjustment
- Clutch Capacity Adjustment
- Clutch Warning History
- Gearbox Oil Temperature History
- Engine Learning Reset
- Engine Idle Balance
- Engine Power Balance Test
- Tyre Pressure Monitor Sensor Learning (requires sensor stimulator also available from Litchfield)
- Steering Wheel Angle Calibration
- Decel G Sensor Calibration
- Brake Pressure Sensor Calibration
- Brake Pressure Valve Calibration
Litchfield License promise:
For security reasons removing a licences from an ECU and putting it back onto the cable/dongle is not currently possible. So all Litchfield customers have the option to uninstall the ECUTEK license from within the ECU and not incur an additional license cost if you would like to tune a new car with your ProEcu cable. Contact us for more information.
Compatibility with other Makes and models within the ECUTEK family:
 
This is one of the amazing features about ProECU, it is compatible with any of the ECU’s that are currently support. So for example if you have a GTR but your friend has a Mitsubishi Evo X it has an engine light the ProEcu software will allow you to fault diagnosis the problem free of charge. All of the Data logging facilities will also be available along with any servicing tools all free. The only additional cost is if the end user would like to upgrade this car with us using E-tuning.
Current supported vehicles are:
Nissan GTR 2007-2012
Nissan JUKE 1.6 Turbo 2010 -2012
Nissan 350z and Nissan 370z (Coming Summer 2012)
Subaru BRZ and Toyota GT86 (coming soon)
Subaru Impreza WRX and STI 2004-2012
Subaru Forester XT and STI 2003-2012
Subaru 2.0 Diesel 2006-2012
Subaru Legacy Spec B 3.0 and 2.0 Turbo
Mazda MX-5 Mk3 and Mk3.5
Mazda 3 MPS and 6 MPS
Mazda CX7
Mazda 2.0 and 2.2 Diesel (coming soon)
Mazda RX8 (coming soon)
Mitsubishi Evo X and Lancer Ralliart
Mitsubishi L200 Turbo Diesel (coming soon)
Mitsubsihi Shogun Turbo Diesel (coming soon)
Mitsubishi Colt CZT and Euro Colt Raliart
Smart Four Brabus
This list is always expanding with many new makes and models due in the near future.
ProECU Beta
The initial launch of ProECU package will be in Beta form so that we can gauge customer’s opinion and look to improve the product where possible.
We will also be providing a detailed website update which will help ProECU customers get the most out of the software as well as being a source for the latest updates and information.
The price of ProECU is £240 Inc. VAT (£200 ex.VAT) and they are instock now!
If you have any questions or would like more information just let us know.
Leave a comment
archives
- May 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- March 2012
- February 2012
- January 2012
- November 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010



